Chart

Epoxy and UV resin heat resistance chart for coasters and trays

Published

As an Amazon Associate we earn from qualifying purchases. This does not change our picks. Affiliate disclosure
New to Prime? Try Prime free for fast, free shipping on eligible items.

Gear for this job

All 6 picks compared
A couple examines a handmade blue resin art coaster in an indoor setting
Photo: Thirdman on Pexels

A resin coaster does not melt under a hot mug. It softens, and a hot object can then mark the surface. Clear epoxies that cure at room temperature lose hardness at fairly low temperatures. This chart lists only temperatures that a maker prints on a technical data sheet, a bulletin or its own FAQ page, with the product named. It keeps two kinds of numbers apart: a use limit in the maker's words, and the heat deflection temperature from a standard test. Where a maker publishes nothing, the cell says so.

Resin heat resistance chart: maker figures in F and C

Read each row across. The third column is the maker's own limit for use. The fourth is the heat deflection temperature (HDT), a lab test result, where the maker publishes one. They are different measurements and should not be mixed.

How much heat can epoxy resin withstand?

For the clear craft epoxies in the chart, not much: use limits of 120 to 130 F (49 to 54 C) and heat deflection temperatures of 100 to 122 F (38 to 50 C). ArtResin describes what happens at its 120 F limit: the resin may soften slightly and returns to normal once it cools. Above that, it says, heat such as a hot dish straight from the oven or a piece left in a hot car can permanently damage the finish.

In this chart the deep pour resins have the lowest figures: 100 F for EpoxAcast 692 and 108 F for Amazing Deep Pour and FlowCast. The types are compared in casting resin vs coating resin.

Every figure applies to fully cured resin. Smooth-On measured EpoxAcast 690 after 7 days and EpoxAcast 692 after 21 days at 70 F, and TotalBoat's figure rises from 118 F to 122 F with a post cure. A coaster used before its full cure has not reached these values. Full cure times are in the epoxy resin cure time chart.

Heat deflection temperature vs heat resistant claims

Heat deflection temperature (HDT) comes from a standard test, ASTM D648, named on the Alumilite and Smooth-On sheets: a bar of cured resin is put under load and warmed until it bends by a set amount. Glass transition temperature (Tg) is a related figure. EcoPoxy defines it as the point where cured resin changes from a rigid, glassy material to a soft one that may permanently deform when force is applied. Both tell you where the resin stops behaving like a hard solid.

A plain heat resistant figure has no test behind it unless the maker names one. One spec list shows the gap. A retailer's copy of Alumilite's data for Amazing Deep Pour prints a heat resistance of 400+ F and, on the next line, a heat deflection temperature of 108 F. Both lines describe the same resin, and only the second says anything about a hot mug. When a listing gives one big number, look for the HDT or Tg line on the data sheet and compare like with like.

Note.A maker's use limit and its HDT usually sit close together. TotalBoat ThickSet: HDT of 118 to 122 F, and no items hotter than 125 F on the cured surface.

Will a hot mug mark a resin coaster?

Makers do not agree on the wording. ArtResin says everyday heat, like a hot cup of coffee on a coaster, will not damage the surface, while setting its limit at 120 F (50 C). Smooth-On is stricter: do not rest hot beverage cups or other containers above 120 F (49 C) on cured EpoxAcast, because this will damage the epoxy surface. TotalBoat says no items hotter than 125 F on cured ThickSet.

Water boils at 212 F (100 C), so a mug filled straight from the kettle starts far above every limit in the chart. Whether it marks the coaster depends on how hot the base of the mug gets and how long it sits there, and no maker publishes a figure for that. The careful reading of the data sheets: a resin coaster suits cold and warm drinks, and a very hot mug or a teapot is a risk the makers have warned about. Heat is a separate question from food contact, covered in is epoxy resin food safe.

Is UV resin heat resistant?

No UV resin maker checked publishes a heat deflection temperature. Let's Resin and Art Clay World give no temperature at all in their instructions. Let's Resin only tells owners to keep finished pieces away from sunlight and high heat such as heaters and stoves. Resin Rockers states in its FAQ that its UV resin is heat resistant up to 150 F (66 C). It adds that pieces should still be protected at that temperature, especially with inclusions such as vinyl or pigment, and that metal in jewelry conducts heat.

Treat that 150 F as a maker's claim, not a test result. No method is named, so it cannot be compared with the HDT column. For any other UV resin, look for a technical data sheet on the maker's site. If there is none, keep the piece away from hot cups, car dashboards and sunny windows. The two resin types are compared in UV resin vs epoxy resin.

Other heat that damages resin: cars, ovens and sun

Hot drinks are not the only source. ArtResin names a piece left in a hot car and a hot dish straight from the oven as heat that can permanently damage the finish. Smooth-On adds a second effect: unpainted epoxy will yellow after exposure to UV light or to excessive heat above 100 F (38 C). So a tray kept on a sunny windowsill can lose clarity even if it never softens. More on that in does UV resin yellow.

Which epoxy resin is heat resistant?

None of the clear craft epoxies in the chart is rated above 130 F, so choosing by brand inside this group changes little. If a project needs more, look for a resin whose data sheet prints a higher HDT, and check how it must be cured to reach it. These are the lines to look for on a data sheet.

  • Heat deflection temperature (HDT, ASTM D648) or glass transition (Tg): the figures that can be compared between products.
  • The cure behind the figure: room temperature or post cure, and after how many days.
  • A plain use limit, worded as not recommended beyond a temperature, or do not place items hotter than it.
  • A blank counts as information: Amazing Clear Cast lists heat deflection as N/A and gives only its 130 F limit.

Epoxy picks for tumblers →

Quick answers

Short answers to the most searched questions on resin and heat. Every temperature is a maker figure for a named product, not a test result of this site.

  • Is epoxy resin heat resistant? Only mildly. The clear craft epoxies checked are limited by their makers to 120 to 130 F (49 to 54 C).
  • Is UV resin heat resistant? No maker checked publishes a tested figure. Resin Rockers claims up to 150 F for its resin, with no test method named.
  • What is the epoxy resin temperature limit? ArtResin 120 F, EpoxAcast 120 F for hot cups, TotalBoat ThickSet 125 F, Amazing Clear Cast 130 F.
  • What is the epoxy resin temperature range? For curing, makers ask for a room of about 70 to 80 F. For the finished piece, stay under the maker's use limit.
  • How much heat can epoxy resin withstand? It softens near its heat deflection temperature: 100 to 122 F (38 to 50 C) for the resins that publish one.

Use this chart

Print it, save the image version, or put it on your own site or forum post with the code below. The code keeps a link back to this page as the source.

Embed code

<a href="https://resinandmold.com/blog/resin-heat-resistance-chart"><img src="https://resinandmold.com/charts/resin-heat-resistance-chart/image.png" alt="Epoxy and UV resin heat resistance chart for coasters and trays" width="600" loading="lazy"></a>
<p>Source: <a href="https://resinandmold.com/blog/resin-heat-resistance-chart">Epoxy and UV resin heat resistance chart for coasters and trays</a>, Resin and Mold</p>

What you need for this

Sources