Comparison

UV resin vs epoxy resin: differences, cost and best uses

Published

As an Amazon Associate we earn from qualifying purchases. This does not change our picks. Affiliate disclosure
New to Prime? Try Prime free for fast, free shipping on eligible items.

Gear for this job

All 7 picks compared

This page is for choosing a first resin. Searchers call two-part epoxy regular resin, and it is the product sold as Part A and Part B. UV resin comes in one bottle and stays liquid until UV light reaches it. Neither is better overall. The size and depth of the piece decide, along with how long you can wait and whether light can get to the resin. The figures are maker data for a clear resin at room temperature. Lamps, bottles and brands differ, so the label on your own product has the final word.

UV resin vs epoxy resin: side by side

The rows that decide most projects are depth per layer and cure time. UV resin wins on speed, epoxy wins on depth and size.

Is UV resin the same as epoxy resin?

No. They look alike when cured, but they are different materials that harden in different ways. Epoxy is a resin and a hardener that react with each other once mixed. The ArtResin safety data sheet, for example, lists an epoxy resin in Part A and an amine hardener in Part B. The Let's Resin safety data sheet for UV resin lists a urethane acrylate and a light-sensitive ingredient that starts the cure under UV.

That difference explains the rest of the table. Epoxy cures all the way through in the dark, so depth and opaque molds are not a problem, but the ratio has to be right: a wrong ratio leaves it tacky or uncured. UV resin has no ratio to get wrong, but it cures only where light reaches. It will not harden in room air without UV.

Cure time: minutes against days

A clear layer of UV resin about 2 mm thick cures in 30 to 90 seconds under a UV-LED lamp and in 2 to 4 minutes under a 36 W tube lamp, by the figures Padico and Let's Resin give. Let's Resin advises 3 to 5 minutes per side for a full cure. Direct sun takes 5 to 15 minutes. The UV resin curing time chart lists times by light source.

Coating and casting epoxy are usually hard enough to demold in about 24 hours and fully cured in 72 hours at 70 to 77 F. Deep pour epoxy needs 24 to 72 hours before demolding and 5 to 7 days for a full cure. A cold room slows all of this. Typical times by resin type are in the epoxy cure time chart.

Depth, molds and color: where UV resin runs out

UV resin is built up in layers of about 2 to 3 mm, each cured before the next. A coaster mold 3/8 in (10 mm) deep would take 4 to 5 cured layers of UV resin, and one pour of casting epoxy. The light also has to get in: an opaque mold blocks it, so UV resin needs a clear or translucent mold and a cure from both sides.

Color has the same limit. Darker and denser color cures slower, and too much stops the cure. Let's Resin says to keep add-ins under 5 percent of the resin volume. Epoxy takes up to about 6 percent of the mixed volume by ArtResin's figure, and it cures the same under opaque pigment because it does not need light. Steps for tinting are in how to color UV resin.

Cost and tools, in general terms

UV resin is sold in small bottles and epoxy in larger two-bottle kits. That matters little for earrings and a lot for a set of coasters, which needs far more resin than a small bottle is meant for. A round coaster 4 in across and 3/8 in deep holds about 77 ml. The resin calculator works out the amount for any mold before you buy.

The tools differ too. UV resin needs a lamp of 365 to 405 nm and nothing to measure. Epoxy needs graduated cups or a scale, stir sticks and a dust-free spot where the piece can sit level for a day or more. Epoxy that has been mixed must be used within its working time, while unused UV resin stays in the bottle.

Choose UV resin when

UV resin suits work that is small, thin and open to light, and work where waiting a full day for each step is not practical.

  • Jewelry and bezels: open-back and shallow bezels, charms and earrings that fit under a lamp and are a few millimeters deep.
  • Coating polymer clay or air dry clay: a thin brushed layer that cures in minutes gives a gloss finish.
  • Small fixes: filling a dent, sealing a surface or adding a thin clear coat over a cured piece.
  • Work in stages: each layer is hard in minutes, so inclusions can be placed and fixed layer by layer in one sitting.
  • Very small amounts: there is nothing to mix, so no leftover mixed resin is wasted.

UV resin kits with a lamp →

Choose epoxy resin when

Epoxy suits anything deeper than a few millimeters, larger than a lamp, or hidden from light. Pick the epoxy type by the depth of one pour.

  • Coasters and trays: casting epoxy fills a 3/8 in mold in one pour and is ready to demold in 18 to 24 hours.
  • Deep molds: cubes, spheres, pyramids and flower blocks need deep pour epoxy at 1 to 2 in per layer.
  • Opaque silicone molds or heavy, opaque color: epoxy cures without light.
  • Large flat coats: tumblers, boards and paintings take a coating epoxy that self-levels to about 1/8 in.
  • Batches: many pieces poured at once from one mixed cup.

Which epoxy: casting or coating →

Tacky film, yellowing and handling

A thin tacky film on a hard UV resin piece is normal for many UV resins, because oxygen at the surface slows the cure there. It wipes off with isopropyl alcohol after the last layer. Epoxy is different: a tacky epoxy surface means a problem with ratio, mixing or temperature. Every clear epoxy yellows in time with sunlight, heat and age, and UV resin is not exempt: see does UV resin yellow.

Handling rules are the same for both. Liquid epoxy and liquid UV resin can cause skin allergy with repeated contact, so wear nitrile gloves and eye protection and ventilate the room. Do not look into a UV lamp. More detail is in is UV resin safe.

Quick answers

Short answers to the searches behind this page. Figures are typical maker data for clear resin, and your label has the final word.

  • UV resin vs epoxy resin: which is better? Neither overall. UV resin is better for small, thin pieces finished in minutes. Epoxy is better for depth, size and opaque molds.
  • UV resin vs epoxy resin for jewelry? UV resin for bezels, charms and thin pieces a few millimeters deep. Epoxy for thicker pendants, opaque molds and batches.
  • Is UV resin the same as epoxy resin? No. UV resin is one part and cures under UV light. Epoxy is two parts that cure by reacting with each other.
  • UV resin vs two part resin for coasters? Two-part casting epoxy. A 3/8 in coaster is one epoxy pour, against 4 to 5 cured layers of UV resin.
  • UV resin or epoxy resin for a beginner? UV resin for a first small project with no measuring. Epoxy once the pieces get deeper than about 3 mm.

What you need for this

Sources