Gear guide
Best UV resin for jewelry making: clear, hard and low odor
Updated Picked from Amazon listings, not hands-on tests. How we pick

UV resin for jewelry making needs to do three things: flow into a bezel or a small mold, cure hard instead of bendy, and come out from under the lamp without a sticky surface. Hard type resins are sold for exactly that, and the bottles look much alike, so this guide compares six of them by what their Amazon listings state: cure time, the lamp the listing names, viscosity, hardness and total weight. Nothing was cured for this guide. Low viscosity resin, around 2000 cps where a figure is given, runs into small molds; none of these listings is a thick doming formula. Tack-free, low odor and anti-yellowing statements are the makers' claims and are reported that way. None of the listings states a lamp wavelength; jewelry resin lamps sit in the 365 to 405 nm band, and for a pendant or bezel layer around 2 mm deep, count on 30 to 90 seconds with a UV-LED lamp; a 36 W tube lamp needs 2 to 4 minutes for the same depth. If a cured pendant feels hard but has a slight tacky skin, that is common with hard type UV resins; isopropyl alcohol on a cloth takes it off.
As an Amazon Associate we earn from qualifying purchases. This does not change our picks. Affiliate disclosure
New to Prime? Try Prime free for fast, free shipping on eligible items.
Top picks at a glance
Compare all picksClosest match for the job
KISREL hard type UV resin, 300 g bottle
Names the lamp and the time: 1 to 3 minutes of curing under a 36W UV lamp.
See price on AmazonSee it on AmazonMost for the money on paper
Craft Resin UV Resin Kit
Same brand as the earlier pick and the same 500g total, split into five 100g bottles, so a bottle can be opened as needed.
See price on AmazonSee it on AmazonMost complete listing
Bsrezn hard UV resin, 400 g in 4 bottles
States three figures: viscosity 2000 cps, hardness 85D and a shrinkage rate under 2 percent.
See price on AmazonSee it on Amazon
Compare the picks
- KISREL hard type UV resin, 300 g bottle
- Viscosity
- not stated
- Cure time
- 1-3 min with 36 W lamp
- Craft Resin UV Resin Kit
- Viscosity
- -
- Cure time
- -
- Bsrezn hard UV resin, 400 g in 4 bottles
- Viscosity
- 2000 cps
- Cure time
- not stated
- LET'S RESIN hard UV resin, 300 g bottle
- Viscosity
- 2000 cps
- Cure time
- Minutes (lamp not stated)
- ULLFEU clear hard UV resin, 1000 g
- Viscosity
- not stated
- Cure time
- 1-3 minutes
- YIEHO hard type UV resin, 300 g bottle
- Viscosity
- Low (no figure)
- Cure time
- not stated
| Pick | Viscosity | Cure time | Price | Per g | Link |
|---|---|---|---|---|---|
| KISREL hard type UV resin, 300 g bottle | not stated | 1-3 min with 36 W lamp | - | - | Amazon |
| Craft Resin UV Resin Kit | - | - | - | - | Amazon |
| Bsrezn hard UV resin, 400 g in 4 bottles | 2000 cps | not stated | - | - | Amazon |
| LET'S RESIN hard UV resin, 300 g bottle | 2000 cps | Minutes (lamp not stated) | - | - | Amazon |
| ULLFEU clear hard UV resin, 1000 g | not stated | 1-3 minutes | - | - | Amazon |
| YIEHO hard type UV resin, 300 g bottle | Low (no figure) | not stated | - | - | Amazon |
Facts are taken from each Amazon listing. Prices are checked daily and shown with their date.
The picks in detail
Pick 1 · KISREL
KISREL hard type UV resin, 300 g bottle
See price on AmazonA 300 g bottle of hard type UV resin sold for jewelry making. The listing states a 1 to 3 minute cure under a 36W UV lamp and a hard, non-stick surface after curing.
What the listing offers
- Names the lamp and the time: 1 to 3 minutes of curing under a 36W UV lamp.
- The product page states the cured piece is hard, non-stick and crystal clear, with a reduced odor formula.
- Described as self-leveling, and the spec sheet says mica powder, colorants, glitter and sequins can be mixed in.
Limits to know
- No viscosity or hardness figure is given, so there is no number to compare with the 2000 cps resins.
- The listing advises not touching a piece right after curing, until it has cooled, to avoid leaving fingerprints.
Pick 2 · Craft Resin
Craft Resin UV Resin Kit
See price on AmazonA 500g hard type, low viscosity UV resin kit from Craft Resin, supplied as five 100g bottles, aimed at jewelry, small molds, bezels and polymer clay coating.
What the listing offers
- Same brand as the earlier pick and the same 500g total, split into five 100g bottles, so a bottle can be opened as needed.
- Low viscosity flow is stated for tiny bezels and mini molds, and the hardness is given as 85D with under 2% shrinkage.
- The listing names a 1 to 3 minute cure with the maker's 24W UV light and describes the resin as low odor, no mixing and anti-yellowing.
Limits to know
- The quoted cure time is tied to the maker's own 24W lamp, so cure times with another lamp are not stated.
- Low viscosity resin runs, so it is a poor choice for doming or thick coats compared with a high viscosity formula.
Pick 3 · Bsrezn
Bsrezn hard UV resin, 400 g in 4 bottles
See price on Amazon400 g (14 oz) of hard UV resin in four bottles. The listing states a low viscosity of 2000 cps, a hardness of 85D and shrinkage under 2 percent, and names earrings and pendants as uses.
What the listing offers
- States three figures: viscosity 2000 cps, hardness 85D and a shrinkage rate under 2 percent.
- Four separate bottles keep unused resin sealed, and the product page names earrings and pendants as typical pieces.
- The listing advises translucent silicone molds so UV light reaches the resin from all directions.
Limits to know
- No cure time and no lamp wattage or wavelength appear in the spec sheet bullets.
- The yellow-resistant finish is the maker's claim; the manufacturer gives no test or time span for it.
Pick 4 · LET'S RESIN
LET'S RESIN hard UV resin, 300 g bottle
See price on AmazonA 300 g hard UV resin for casting and silicone molds. The listing states a low viscosity of 2000 cps, shrinkage under 2 percent and curing with UV light in minutes, without naming a lamp.
What the listing offers
- Viscosity is stated at 2000 cps, and the product page says it flows smoothly into tiny molds.
- Less than 2 percent shrinkage is stated, and resin earrings are named among the uses.
- The spec sheet describes a low odor formula with enhanced anti-yellowing properties, as the maker's claim.
Limits to know
- Cure time is given only as minutes, and no lamp wattage or wavelength is named.
- High hardness is claimed without a Shore figure, unlike the two 85D listings in this guide.
Pick 5 · ULLFEU
ULLFEU clear hard UV resin, 1000 g
See price on AmazonA 1000 g bulk pack of clear hard UV resin. The listing states 1 to 3 minutes under a UV lamp on the front and back of the mold and names earrings, rings, pendants and keychains.
What the listing offers
- States the method: a UV lamp on the front and back of the mold for 1 to 3 minutes.
- 1000 g suits people making jewelry in volume, and the product page names earrings, bracelets, rings and pendants.
- The spec sheet says active diluents were added to reduce VOCs and odor, and antioxidants to resist yellowing.
Limits to know
- No lamp wattage, viscosity or hardness figure is stated, so it is hard to compare on numbers.
- A kilogram is a lot for occasional pendants, and the title's no odor wording is the maker's claim.
Pick 6 · YIEHO
YIEHO hard type UV resin, 300 g bottle
See price on AmazonA 300 g bottle of hard type UV resin. The listing names its ingredients, mentions a Safety Data Sheet and REACH requirements and describes low viscosity, but gives no cure time or lamp.
What the listing offers
- The spec sheet names the resin chemistry: bisphenol A epoxy acrylate, polyurethane acrylate and epoxy acrylate.
- States that a Safety Data Sheet is available and that the ingredients meet REACH requirements.
- Comes with a detailed instruction manual covering how to avoid bubbles and improve curing, per the product page.
Limits to know
- No cure time, lamp wattage or wavelength is stated in the spec sheet bullets.
- Low viscosity and super hard are claimed with no cps or Shore figure to compare.
Read before you buy
- Is UV resin waterproof? What fully cured UV resin can takeIs UV resin waterproof? Fully cured UV resin resists water, but thin or undercured layers turn tacky or cloudy. How to cure it right and care for resin jewelry.
- UV resin vs epoxy resin: differences, cost and best usesUV resin cures in minutes under a lamp in 2 to 3 mm layers. Epoxy needs mixing and 24 to 72 hours but pours 1/8 in to 2 in deep. Table and picks by project.
- Why UV resin stays sticky or will not cure, and how to fix itUV resin sticky after curing? Match what you see in the table: tacky film, sticky mold side, soft inside or dense color. Fixes with lamp times and limits.
- UV resin curing time chart by lamp type, thickness and colorUV resin cure times by light source from maker instructions: 30 to 90 seconds under a UV-LED lamp, 2 to 4 minutes under a 36 W UV lamp, longer in sun.
- Epoxy and UV resin heat resistance chart for coasters and traysHeat limits for named clear epoxies, in F and C, as printed on maker data sheets: use limits of 120 to 130 F and heat deflection of 100 to 122 F.
More gear for the choose your resin stage
- Best epoxy resin for outdoor use: UV resistant and marine grade picks
- Best UV resin kit with light: starter sets for beginners
- Best UV resin for coating polymer clay and air dry clay
- Best resin casting powder: water ratio, finish and bag sizes
- Best epoxy resin for tumblers: fast cure, clear and heat tolerant
Resin and Mold chooses every product independently from what its Amazon listing states. We may earn a commission from the links above. As an Amazon Associate I earn from qualifying purchases.