Explainer
Will UV resin cure without a UV light? Sunlight, windows and times
Published
As an Amazon Associate we earn from qualifying purchases. This does not change our picks. Affiliate disclosure
New to Prime? Try Prime free for fast, free shipping on eligible items.
Short answer
Yes, but only with sunlight. UV resin hardens under light of 365 to 405 nm, and direct sun supplies it: Let's Resin gives 5 to 15 minutes for a clear 2 mm layer on a sunny day and 20 minutes or more under cloud. It will not cure in room air, in the dark or with time alone. Makers give no figure for windows or indoor bulbs.
Gear for this job
All 7 picks comparedSuzzam 36 W double-sided UV resin lamp, 24 LEDs
See price on AmazonSee it on AmazonWondrokey 48 W double-sided UV lamp, 48 LEDs
See price on AmazonSee it on AmazonResiners AirWave Pro Foldable UV Lamp
See price on AmazonSee it on Amazon

This page is for anyone holding a bottle of UV resin with no lamp, a dead lamp or a lamp that turned out to be the wrong kind. The short version: the resin needs ultraviolet light, and the sun is the only source besides a UV lamp that makers list. What decides the result is how strong the sun is, how thick the layer is and how much color is in it. Each case is answered below, with the maker figure where one exists and a plain statement where none does.
Will UV resin cure in the sun, by a window or on its own?
Find your situation in the table. Times are maker figures for a thin clear layer, and they differ a lot between products, so the first check is the instructions for your own resin. Where no maker checked gives a figure, the table says so instead of guessing.
| Situation | Does it cure? | What makers say |
|---|---|---|
| Direct sun on a clear day, outdoors | Yes | Let's Resin: 5 to 15 min. Blue Moon Studio: about 5 to 7 min. Padico Star Drop: 30 to 90 s |
| Cloudy day or indirect sun | Yes, slowly | Padico Star Drop: 3 to 10 min. Let's Resin: 20 min and above. Blue Moon Studio: up to 30 min |
| Sun through a closed window | Slower or not at all | No maker figure found. Take the piece outside if you can |
| Indoor room lighting | Do not count on it | No maker checked lists indoor bulbs as a way to cure, and none gives a time |
| Room air with no sun | No | Art Clay World: unless left in direct sunlight, the resin will not harden in air |
| A drawer, a box or the dark | Never | No light, no cure. This is how makers say to store the bottle |
| A lamp with the wrong wavelength | No, or it stays sticky | Let's Resin: the light must be 365 to 405 nm, and not all nail lamps are compatible |
Does UV resin need a UV light?
It needs ultraviolet light, not one particular device. Let's Resin describes the cure plainly: the resin has to be exposed to ultraviolet properly and adequately, from a UV device or from the sun, and a lamp should emit between 365 and 405 nm. Padico lists 405 nm for UV-LED lamps and 365 nm for UV lamps, and says its resin cures well in sunlight. Blue Moon Studio says its resin dries only in UV light, from a lamp or from the sun.
That is why waiting does nothing. Two-part epoxy cures by its hardener, with or without light. UV resin has no hardener, so away from UV it stays liquid. That gives unlimited working time, and it also means a piece left on a desk overnight is still wet in the morning. The two resins are compared in UV resin vs epoxy resin.
How long does UV resin take to cure in sunlight?
Makers disagree widely. For a sunny day Let's Resin gives 5 to 15 minutes, measured on a drop 20 mm across and 2 mm thick. Blue Moon Studio gives about 5 to 7 minutes in direct sunlight. Padico lists 30 to 90 seconds in sunny conditions for its Star Drop resin, the same as under its LED lamp. Under cloud the figures are 3 to 10 minutes (Padico), 20 minutes and above (Let's Resin) and up to 30 minutes for a cloudy day or indirect sun (Blue Moon Studio).
The sun is not a fixed light source. Padico notes that curing time differs with the size of the piece and with the season, and Let's Resin lists temperature and weather among the things that change it. Use your maker's figure as a starting point, then test the piece. Lamp times are on the UV resin curing time chart.
How to cure UV resin without a UV light
The method is the same as with a lamp, with the sun doing the lamp's job. Work on a small piece with a thin layer, and plan on more time than a lamp needs.
- 1
Fill the mold or bezel indoors, away from windows. Let's Resin warns to avoid direct sunlight while working with UV resin, or it starts to cure before you are ready.
- 2
Keep the layer thin, about 2 to 3 mm, and use a clear or translucent mold so light can reach the resin from more than one side.
- 3
Carry the piece outside on a tray and set it level in direct sun. Leave a clear layer for the time your maker gives: 5 to 15 minutes by Let's Resin's figures, 20 minutes or more under cloud.
- 4
Turn the mold over, or demold the piece and flip it, and give the back the same time. Let's Resin says to cure the back side for as long as the front.
- 5
Let the piece cool for 1 to 2 minutes, then touch it with a gloved finger. If it is still tacky, put it back in the sun and extend the time.
- 6
Add the next layer only when the last one has hardened. Build thicker pieces in layers of 2 to 3 mm, each cured in turn.
Why thick or colored pieces take longer in the sun
Light has to pass through the resin to cure it. Blue Moon Studio says to leave extra time for very dark or very large items, because if the light cannot reach the resin, it will not cure. Under a lamp, Let's Resin gives 2 to 3 minutes per side for its regular colored resins and 4 to 5 minutes for dark colors, and Padico says to allow longer whenever colorant is mixed in. The same holds outdoors.
Keep color under 5 percent of the resin volume, which is Let's Resin's limit, pour thin layers and avoid opaque molds. A sun-cured piece that stays soft inside usually has too much pigment or too thick a layer. See why UV resin stays sticky.
What does not cure UV resin
Several common ideas either do nothing or have no maker figure behind them. None of the following replaces UV light at 365 to 405 nm.
- Waiting. Art Clay World states that unless it is left in direct sunlight, the resin will not harden in air.
- Keeping it in the dark. A closed drawer or box keeps the resin liquid, which is why makers say to store bottles in a dark place.
- Heat. Makers describe warm water or a heat gun as a way to thin UV resin and release bubbles, not as a way to harden it.
- Epoxy hardener. Resin Rockers says UV resin and epoxy cannot be mixed in liquid form.
- Indoor room lighting. No maker checked lists household bulbs as a cure method or gives a time for them.
- A window on a dull day. No maker gives a figure for sun through glass, so expect a slow cure or none.
Note.Stray sunlight does cure UV resin. Keep the bottle capped and stored in the dark, and keep uncured pieces away from windows until you want them to harden.
When a UV lamp is worth getting
Sunlight is fine for an occasional small piece on a bright day. A lamp gives the same result at any hour and in any weather: 30 to 90 seconds under a UV-LED lamp and 2 to 4 minutes under a 36 W UV lamp for a thin clear layer, by Padico and Let's Resin figures. Let's Resin suggests a lamp above 12 W and not over 54 W. Compare the options in the UV light guide.
Quick answers
Short answers on curing UV resin with no lamp. Times are maker figures for a thin clear layer, and the instructions for your own resin come first.
- Will UV resin cure in the sun? Yes. Makers list direct sunlight as a way to cure, with 5 to 15 minutes for a thin clear layer by Let's Resin's figures.
- Does UV resin need a UV light? It needs UV light of 365 to 405 nm. A UV lamp or direct sun both supply it. Room air and time do not.
- How long does UV resin take to cure in sunlight? From 30 to 90 seconds (Padico Star Drop) to 5 to 15 minutes (Let's Resin) in full sun. Under cloud, 3 to 30 minutes or more.
- Will UV resin cure without light? No. In the dark it stays liquid, and Art Clay World says it will not harden in air.
- How to cure resin without UV light? Put a thin layer of UV resin in direct sun and cure both sides. Two-part epoxy needs no light at all: it cures by its hardener.
What you need for this
- See price on AmazonAmazon
Suzzam 36 W double-sided UV resin lamp, 24 LEDs
From Best UV light for curing resin: lamps, flashlights and wattage
- See price on AmazonAmazon
CRAFT RESIN UV kit, 200 g resin and 36 W lamp
From Best UV resin kit with light: starter sets for beginners
- See price on AmazonAmazon
KISREL hard type UV resin, 300 g bottle
From Best UV resin for jewelry making: clear, hard and low odor