Is epoxy resin flammable? Liquid resin, exotherm, torches and cured pieces
Published
As an Amazon Associate we earn from qualifying purchases. This does not change our picks. Affiliate disclosure
New to Prime? Try Prime free for fast, free shipping on eligible items.
Gear for this job
All 6 picks comparedLET'S RESIN 350W dual temp heat gun for resin
See price on AmazonSee it on AmazonResiners 350W mini heat gun for resin bubbles
See price on AmazonSee it on AmazonYEEGEWIN 380W mini heat gun, 480 F and 850 F
See price on AmazonSee it on Amazon
Liquid craft epoxy is not considered flammable: most art and table top resins have flash points well above 200 F and are labeled non-flammable, so they will not ignite from a spark the way acetone or alcohol will. Cured epoxy is a plastic, though, and it will burn if it is held in a flame. In a resin studio the real fire risks are elsewhere: a large batch of mixed epoxy overheating in its cup, a torch used too close, and the flammable solvents used for cleanup.
Liquid resin and hardener
Flammable liquids are those with a flash point under about 140 F, the temperature at which their vapor can ignite. Most two-part craft epoxies are 100 percent solids with no solvent, and their resin and hardener have flash points far above that, typically over 200 F. That is why so many listings call them non-flammable and why they ship without hazardous material labels.
Not every epoxy product is the same. Some industrial coatings, primers and penetrating epoxies are thinned with solvents and are flammable. The safety data sheet for your product states the flash point in section 9 and the fire rating in section 5. If a product smells strongly of solvent or says to keep away from flames, treat it as flammable.
The real hazard: exotherm in the cup
Epoxy cures by a reaction that releases heat. In a thin layer the heat escapes and you barely notice it. In a large mass, such as a full quart left in a mixing cup or a pour deeper than the resin is rated for, the heat builds on itself. The resin can get hot enough to smoke, crack, foam and melt a plastic cup, and in rare cases ignite paper or rags next to it.
Prevent it by mixing only what you can pour within the working time, pouring promptly into the mold or onto the surface where the resin spreads thin, and respecting the maximum pour depth on the label. If a cup starts to get hot and smoke, carry it outside on a non-flammable surface if you can do so safely, or leave it on concrete, away from anything that burns. Do not put water on it, and do not throw a cup of curing resin into a trash bin full of paper.
Torches, heat guns and solvents
Many resin crafters pop bubbles with a small butane or propane torch. Uncured epoxy will not catch fire from a quick pass, but a flame held in one spot can scorch the surface, and the torch can ignite anything else on the bench: paper towels, plastic, alcohol ink, or alcohol used for cleaning. Keep solvents capped and away while you torch, and never torch resin that has alcohol ink or a solvent-based additive still evaporating on top.
A heat gun has no open flame and is the safer choice around paper, glitter, dried flowers and alcohol inks, though it blows dust and needs to move constantly. Isopropyl alcohol and acetone, the usual cleanup solvents, are highly flammable: use them in small amounts, ventilate the room, and let solvent-soaked rags dry flat outdoors before throwing them away.
Keep a fire extinguisher rated for ordinary combustibles and flammable liquids, an ABC type, within reach of the bench if you use a torch, and work on a surface that does not burn, such as a silicone mat over a sturdy table. Turn the torch off and set it down upright between passes rather than holding it lit while you check the surface.
Is cured epoxy flammable?
Cured epoxy is a thermoset plastic. It does not melt and drip like candle wax, but it will char and burn when held in a flame, and once burning it gives off thick, dark smoke that you should not breathe. It is about as combustible as other hard plastics, which means it is not a fire risk on a shelf, but it is not a fireproof material either.
Heat also damages cured epoxy long before it burns. Most craft epoxies soften around 120 to 140 F, so a hot pan, a candle flame or a lighter will mark, bubble or blacken a resin surface. Do not use resin pieces as candle holders without a glass or metal insert, and keep hot pans off resin tables. Special flame retardant epoxies exist for electronics and building use, but craft resins are not sold as flame retardant.
Safe storage and disposal
Store resin and hardener tightly closed at room temperature, away from heaters and direct sun. Heat does not make them ignite, but it shortens shelf life, and hardener in particular yellows with age and heat.
Do not pour liquid resin or hardener down a drain or throw them away separately. Mix leftover amounts at the correct ratio and let them cure in a thin layer on a silicone mat or in a shallow container, where the heat can escape. Cured epoxy is inert and goes out with household trash in most areas. Check local rules for large amounts of unmixed resin.
Frequently asked questions
Is UV resin flammable? Like epoxy, most craft UV resins are not classed as flammable liquids, but the cured resin is a plastic that burns in a flame. Check the safety data sheet for the flash point of your brand.
Can I use a torch on epoxy resin? Yes, with quick passes a few inches above the surface, with no solvents, alcohol ink or paper near the flame. A heat gun is safer in a cluttered space.
Can a resin table catch fire? Not from normal use. A cured epoxy top can be scorched by a hot pan or a candle, and it will burn in a house fire like any plastic or wood finish.
Why did my resin cup smoke? A large amount of mixed resin left in the cup overheated from its own curing reaction. Mix smaller batches and pour promptly.
What you need for this
- See price on AmazonAmazon
LET'S RESIN 350W dual temp heat gun for resin
From Best heat gun for resin art: popping bubbles without damage
- See price on AmazonAmazon
3M 7513 OV/P95 Advanced Comfort respirator, Large
From Best respirator for resin work: cartridges, fit and gloves
- See price on AmazonAmazon
TCP Global Graduated Mixing Cups, 10 oz, 50 Box
From Best epoxy resin mixing cups: silicone sets and graduated disposables