Gear guide

Best large silicone molds for resin: trays, tables and deep blocks

Updated Picked from Amazon listings, not hands-on tests. How we pick

Close-up of hands arranging dried flowers in resin molds for decorative art
Photo: Thirdman on Pexels

A large silicone mold fails in ways a small one does not. Thin walls bow outward under several pounds of resin, a soft base sags if the bench is not flat, and a deep cavity filled in one pour can overheat, crack or yellow. So look past the photo at four things: the inner dimensions and depth, how much resin the maker says it holds, whether a frame or wooden support comes with it, and whether the listing tells you to pour in layers. Depth decides the resin: a 3/8 in tray takes a normal coating or casting epoxy, while anything over about 1 in needs a deep pour resin or several layers. Before buying, work out the volume (length x width x depth in inches, times 0.554 gives fluid ounces) so you buy enough resin. This guide compares seven large silicone molds by what their listings state; nothing here was tested by us.

As an Amazon Associate we earn from qualifying purchases. This does not change our picks. Affiliate disclosure
New to Prime? Try Prime free for fast, free shipping on eligible items.

Top picks at a glance

Compare all picks
  • Closest match for the job

    Extra Large Epoxy Resin Mold, 22.63 in

    Inner dimensions of 22.63 x 11.81 x 1.38 in are stated, which makes resin volume easy to work out.

    See price on AmazonSee it on Amazon
  • Most for the money on paper

    RESINWORLD Serving Tray Resin Mold Set

    Two sizes in the set with stated resin volumes: about 600 ml and 300 ml.

    See price on AmazonSee it on Amazon
  • Most complete listing

    Sakolla Rectangular Epoxy Resin Mold, 9 in

    Listing gives a resin dosage of about 55 to 61 oz to fill, so you know what to buy.

    See price on AmazonSee it on Amazon

Compare the picks

The picks in detail

Pick 1 · Vehipa

Extra Large Epoxy Resin Mold, 22.63 in

See price on Amazon

Long rectangular table mold with a stated inner size of 22.63 x 11.81 x 1.38 in. Suits a narrow side table top, a long serving board or a wall panel.

What the listing offers

  • Inner dimensions of 22.63 x 11.81 x 1.38 in are stated, which makes resin volume easy to work out.
  • Listing describes the silicone as thick and tear resistant with a smooth inner surface.
  • Tells you to pour in layers, the right advice at this depth.

Limits to know

  • Legs and support are not included, and the listing warns the base must sit flat.
  • Depth of 1.38 in is too shallow for a thick river table.
See it on AmazonListing title: Extra Large Epoxy Resin Mold 22.63x11.81x1.38in, Reusable Resin Molds

Pick 2 · Sakolla

Sakolla Rectangular Epoxy Resin Mold, 9 in

See price on Amazon

Deep 9.5 x 6.6 x 2.1 in rectangle mold that the listing says takes 55 to 61 oz to fill. For thick blocks with flowers, insects or keepsakes embedded.

What the listing offers

  • Listing gives a resin dosage of about 55 to 61 oz to fill, so you know what to buy.
  • Mirror finish inner surface, and the product page says the silicone is food grade and BPA free.
  • Advises pouring in layers to avoid overheating, which matches the 2.1 in depth.

Limits to know

  • Smaller footprint than the table molds; it makes a block, not a tray or top.
  • A full fill is heavy and slow; one pour of standard casting resin at this depth risks heat.
See it on AmazonListing title: Sakolla 9″ Rectangular Silicone Molds for Epoxy Resin, Crystal Deep Ca...

Pick 3 · ResinWorld

RESINWORLD Serving Tray Resin Mold Set

See price on Amazon

Two shallow geode tray molds, 14 x 8.54 in and 12.4 x 6.88 in, both 0.39 in deep, with handles. The listing gives resin volumes of about 600 ml and 300 ml.

What the listing offers

  • Two sizes in the set with stated resin volumes: about 600 ml and 300 ml.
  • Shallow 0.39 in depth suits normal casting or coating epoxy in a single pour.
  • Gold and silver handles are included, and the spec sheet names both epoxy and UV resin.

Limits to know

  • At 0.39 in deep these are trays, not deep blocks or table tops.
  • The geode outline limits the design to that one shape.
See it on AmazonListing title: RESINWORLD Set of 2 Size 14‘‘ & 12'' XL Large Serving Tray Silicone Mo...

Pick 4 · SIMEIQI

Simeiqi Round Silicone Resin Table Mold, 24 in

See price on Amazon

A 24 inch round silicone table mold, 2.36 inches deep, with a listed maximum capacity of about 17.5 L. Suits river table tops, coffee tables and large cutting boards poured in layers.

What the listing offers

  • The listing gives the mold as 24 x 2.36 inches with a maximum capacity of about 17.5 L (592 oz), a clear size for round table tops.
  • The kit adds two silicone measuring cups, two rubber gloves, a disposable tablecloth and five wood stirring sticks, so basic pouring tools are covered.
  • The spec sheet describes thick, flexible silicone with a smooth inner surface and suggests mold release spray or mild soapy water for easy demolding.

Limits to know

  • The mold ships folded and the manufacturer says it needs warm water poured in to regain its shape before use, which is an extra setup step.
  • No metal frame or table legs are listed, and the listing advises pouring in several layers to avoid overheating, so a big pour takes planning.
See it on AmazonListing title: 24" Inch Large Resin Table Molds, Round Silicone Molds for Epoxy Table...

Pick 5 · JEYUQAXY

JEYUQAXY Resin Tray Silicone Molds, 13.5 x 9.5 in

See price on Amazon

Deep 13.5 x 9.5 in silicone tray mold with four metal handles in gold and silver. A serving tray mold with the hardware included.

What the listing offers

  • Includes four metal handles, two gold and two silver, for finishing the tray.
  • Listing describes thickened silicone that is flexible and reusable.
  • Advises layered pours and washing the mold with soapy water before and after use.

Limits to know

  • Depth is not stated in the listing, only the 13.5 x 9.5 in footprint.
  • Listing says it suits casting but not coating, and needs release spray after repeated use.
See it on AmazonListing title: JEYUQAXY Large Silicone Tray Molds for Resin, 13.5"X9.5" Deep Rectangl...

Pick 6 · Vehipa

Extra Large Silicone Molds for Epoxy Resin Table

See price on Amazon

An oval silicone table mold with a stated inner size of 24.88 x 13.19 inches and 1.18 inches depth, for river table tops, deli trays and wall art pieces.

What the listing offers

  • Stated inner size of 24.88 by 13.19 inches gives a big casting surface for a small table top, a tray or a wall piece in one pour.
  • Silicone with a smooth surface; the listing says it is flexible and releases by popping the cured piece out, which cuts down on sanding.
  • The oval outline differs from the round and rectangular molds in this guide, a fit for ocean style tables and serving trays.

Limits to know

  • Depth is only 1.18 inches, so it suits thin table tops and trays, not deep blocks or thick river table slabs.
  • Single mold with no frame or support listed, so a large pour needs a flat, level surface under it to keep the silicone from bowing.
See it on AmazonListing title: Extra Large Silicone Molds for Epoxy Resin Table, Oval Epoxy Resin Mol...

Read before you buy

More gear for the molds and release stage

Resin and Mold chooses every product independently from what its Amazon listing states. We may earn a commission from the links above. As an Amazon Associate I earn from qualifying purchases.