Is epoxy resin waterproof? Cured epoxy, wet conditions and limits
Published
As an Amazon Associate we earn from qualifying purchases. This does not change our picks. Affiliate disclosure
New to Prime? Try Prime free for fast, free shipping on eligible items.
Gear for this job
All 6 picks comparedMAS EnviroTex Lite Outdoor Epoxy Kit, 24 oz
See price on AmazonSee it on AmazonTotalBoat Table Top Epoxy Resin Kit, 1 Gallon
See price on AmazonSee it on AmazonTakimo UV Resistant Clear Epoxy Resin Kit, 1 Gal
See price on AmazonSee it on Amazon
Yes, fully cured epoxy resin is waterproof: it does not dissolve, swell or let water through, which is why boat builders use it to seal hulls and why resin coasters, trays and tumblers can be washed. The limits are in the conditions, not the material. Epoxy that is not fully cured, coatings with gaps, hot water, long sun exposure and water that gets in during the cure are what cause resin pieces to cloud, soften or let moisture reach what is underneath.
Why cured epoxy keeps water out
When resin and hardener react, they form a dense, cross-linked plastic with no pores for water to travel through. A sound coat of cured epoxy is a moisture barrier, and marine epoxies are sold for exactly that: sealing wood boats, fiberglass repairs and docks. Cured epoxy takes up only a tiny amount of water even when submerged for long periods, far too little to change how a craft piece looks or works.
That barrier only exists where the resin is. A coaster or a block of resin is waterproof all the way through. A coated object, such as a wood table, a tumbler or a painted canvas, is protected only where the coat is continuous. Water gets in through uncoated undersides, screw holes, cracks at the edges and thin spots where the resin pulled away.
When epoxy is not waterproof yet: the cure
Epoxy is only water resistant once it has fully cured. Most brands state 24 to 72 hours, and many say 7 days before hard use. Washing a tumbler or setting wet glasses on a table before then can leave white marks, cloudiness or a soft surface, because the reaction is not finished.
Water during the cure is a separate problem. Moisture from a wet mold, a damp wood surface or very humid air reacts with the hardener and can leave a cloudy, greasy or waxy film. That film, called amine blush, is common with some marine and slow-cure epoxies in humid or cold conditions. It does not harm the cured resin, but you must wash it off with water and a scrub pad before sanding or adding another coat, or the next layer will not bond. Keep molds and surfaces completely dry and work below about 60 to 70 percent humidity.
Hot water, dishwashers and soaking
Cured epoxy handles cold and warm water easily, but heat is its weak point. Common art and coating epoxies soften at roughly 120 to 140 F, and a dishwasher runs hotter than that, with harsh detergent on top. Resin tumblers, coasters and trays should be washed by hand in warm, not hot, water with a mild soap, and dried.
Long soaks are fine for fully cured, well made pieces, but objects that combine resin with other materials can still fail. A resin coated wood board left in water will eventually swell at any spot the coat does not cover, and the swelling can crack the resin. Glitter tumblers can let water creep in at the rim or base if the coat does not seal the edge.
Resin pieces used around water every day, such as bath trays, soap dishes and sink caddies, last longest when they are thick, fully cured for a week before use and kept out of standing water between uses. Dry them after washing, especially where resin meets wood, metal handles or felt pads, because water sitting in those joints is what finds a way in. If a cured piece turns faintly white after a long soak, let it dry for a day or two at room temperature; mild haze from absorbed moisture often clears as it dries.
Outdoors, sunlight and weather
Rain alone does not hurt cured epoxy. Sunlight does. UV breaks down the surface over months, first as yellowing, then as a chalky, dull film and fine cracks. Once the surface cracks, water reaches the wood underneath, and freeze and thaw cycles make it worse.
For outdoor tables, signs, cornhole boards and boats, choose an epoxy that states UV resistance and plan a topcoat. The marine practice is epoxy for the waterproof barrier and a UV-blocking spar varnish or two-part polyurethane over it to protect the epoxy from the sun. Refresh the topcoat every year or two in full sun.
How to make a resin coated piece fully waterproof
Coat every side. For wood, apply a thin seal coat to the top, edges and bottom, including end grain, which absorbs water fastest. Seal screw holes and cut edges as well. Cover paper, photos and fabric with a sealer before they go into resin, so moisture cannot wick along them.
Use enough thickness and let it cure. A single thin brushed coat can have pinholes; a flood coat of about 1/8 in, or two thin coats, gives a continuous barrier. Measure the ratio exactly and mix thoroughly, because undercured patches stay soft and let water in. Wait the full cure time, then water test a sample piece before trusting it with daily use.
Frequently asked questions
Is epoxy resin waterproof for a shower or bathroom? Cured epoxy coatings resist water and are used on bathroom counters and floors, but they need a properly prepared, dry surface, complete coverage and products sold for that use. Hot water and cleaning chemicals shorten their life.
Can I use epoxy to fix a leak? Epoxy putties and marine epoxies are made for sealing leaks in pipes, boats and containers, and cure underwater in some cases. Clear art resin is not designed for this.
Is UV resin waterproof too? Fully cured UV resin is water resistant, but thin layers that are slightly undercured can stay tacky and turn cloudy in water. The separate guide on UV resin explains it.
Will water make epoxy cloudy? Water during the cure can cloud it. After full cure, a white haze after washing usually means the resin was not fully cured, or the water was too hot.
What you need for this
- See price on AmazonAmazon
MAS EnviroTex Lite Outdoor Epoxy Kit, 24 oz
From Best epoxy resin for outdoor use: UV resistant and marine grade picks
- See price on AmazonAmazon
Bond Craftor tumbler epoxy resin, 32 oz
From Best epoxy resin for tumblers: fast cure, clear and heat tolerant
- See price on AmazonAmazon
LET'S RESIN casting resin kit, 34 oz
From Best epoxy resin for silicone molds: clear casting picks