# Best large silicone molds for resin: trays, tables and deep blocks

Source: https://resinandmold.com/best/best-large-silicone-molds-for-resin
Updated: 2026-11-08
Publisher: Resin and Mold. Picks are chosen from what each Amazon listing states, not from hands-on tests. Method: https://resinandmold.com/how-we-pick

A large silicone mold fails in ways a small one does not. Thin walls bow outward under several pounds of resin, a soft base sags if the bench is not flat, and a deep cavity filled in one pour can overheat, crack or yellow. So look past the photo at four things: the inner dimensions and depth, how much resin the maker says it holds, whether a frame or wooden support comes with it, and whether the listing tells you to pour in layers. Depth decides the resin: a 3/8 in tray takes a normal coating or casting epoxy, while anything over about 1 in needs a deep pour resin or several layers. Before buying, work out the volume (length x width x depth in inches, times 0.554 gives fluid ounces) so you buy enough resin. This guide compares seven large silicone molds by what their listings state; nothing here was tested by us.

## Picks

### 1. Extra Large Epoxy Resin Mold 22.63x11.81x1.38in, Reusable Resin Molds

Long rectangular table mold with a stated inner size of 22.63 x 11.81 x 1.38 in. Suits a narrow side table top, a long serving board or a wall panel.

What the listing offers:
- Inner dimensions of 22.63 x 11.81 x 1.38 in are stated, which makes resin volume easy to work out.
- Listing describes the silicone as thick and tear resistant with a smooth inner surface.
- Tells you to pour in layers, the right advice at this depth.

Limits to know:
- Legs and support are not included, and the listing warns the base must sit flat.
- Depth of 1.38 in is too shallow for a thick river table.

### 2. Sakolla 9″ Rectangular Silicone Molds for Epoxy Resin, Crystal Deep Casting Epoxy Mold for Flowers Preservation, DIY Artwork, Office Home Decoration

Deep 9.5 x 6.6 x 2.1 in rectangle mold that the listing says takes 55 to 61 oz to fill. For thick blocks with flowers, insects or keepsakes embedded.

What the listing offers:
- Listing gives a resin dosage of about 55 to 61 oz to fill, so you know what to buy.
- Mirror finish inner surface, and the product page says the silicone is food grade and BPA free.
- Advises pouring in layers to avoid overheating, which matches the 2.1 in depth.

Limits to know:
- Smaller footprint than the table molds; it makes a block, not a tray or top.
- A full fill is heavy and slow; one pour of standard casting resin at this depth risks heat.

### 3. RESINWORLD Set of 2 Size 14‘‘ & 12'' XL Large Serving Tray Silicone Molds Epoxy Resin Geode Tray Mold with Gold & Silver Handles (Rectangle)

Two shallow geode tray molds, 14 x 8.54 in and 12.4 x 6.88 in, both 0.39 in deep, with handles. The listing gives resin volumes of about 600 ml and 300 ml.

What the listing offers:
- Two sizes in the set with stated resin volumes: about 600 ml and 300 ml.
- Shallow 0.39 in depth suits normal casting or coating epoxy in a single pour.
- Gold and silver handles are included, and the spec sheet names both epoxy and UV resin.

Limits to know:
- At 0.39 in deep these are trays, not deep blocks or table tops.
- The geode outline limits the design to that one shape.

### 4. 24" Inch Large Resin Table Molds, Round Silicone Molds for Epoxy Table Top | Extra Large Silicone Mold for River Table, Coffee Table, Cutting Board, Flexible, Deep Pour

A 24 inch round silicone table mold, 2.36 inches deep, with a listed maximum capacity of about 17.5 L. Suits river table tops, coffee tables and large cutting boards poured in layers.

What the listing offers:
- The listing gives the mold as 24 x 2.36 inches with a maximum capacity of about 17.5 L (592 oz), a clear size for round table tops.
- The kit adds two silicone measuring cups, two rubber gloves, a disposable tablecloth and five wood stirring sticks, so basic pouring tools are covered.
- The spec sheet describes thick, flexible silicone with a smooth inner surface and suggests mold release spray or mild soapy water for easy demolding.

Limits to know:
- The mold ships folded and the manufacturer says it needs warm water poured in to regain its shape before use, which is an extra setup step.
- No metal frame or table legs are listed, and the listing advises pouring in several layers to avoid overheating, so a big pour takes planning.

### 5. JEYUQAXY Large Silicone Tray Molds for Resin, 13.5"X9.5" Deep Rectangle Epoxy Tray Molds with 4pcs Gold & Silver Handles, Resin Table Mold for River Board Table DIY Art Home Decoration

Deep 13.5 x 9.5 in silicone tray mold with four metal handles in gold and silver. A serving tray mold with the hardware included.

What the listing offers:
- Includes four metal handles, two gold and two silver, for finishing the tray.
- Listing describes thickened silicone that is flexible and reusable.
- Advises layered pours and washing the mold with soapy water before and after use.

Limits to know:
- Depth is not stated in the listing, only the 13.5 x 9.5 in footprint.
- Listing says it suits casting but not coating, and needs release spray after repeated use.

### 6. Extra Large Silicone Molds for Epoxy Resin Table, Oval Epoxy Resin Molds | for DIY Art Home Decor, River Table, Cutting Board, Resin Art

An oval silicone table mold with a stated inner size of 24.88 x 13.19 inches and 1.18 inches depth, for river table tops, deli trays and wall art pieces.

What the listing offers:
- Stated inner size of 24.88 by 13.19 inches gives a big casting surface for a small table top, a tray or a wall piece in one pour.
- Silicone with a smooth surface; the listing says it is flexible and releases by popping the cured piece out, which cuts down on sanding.
- The oval outline differs from the round and rectangular molds in this guide, a fit for ocean style tables and serving trays.

Limits to know:
- Depth is only 1.18 inches, so it suits thin table tops and trays, not deep blocks or thick river table slabs.
- Single mold with no frame or support listed, so a large pour needs a flat, level surface under it to keep the silicone from bowing.

As an Amazon Associate I earn from qualifying purchases.