# Best epoxy resin for outdoor use: UV resistant and marine grade picks

Source: https://resinandmold.com/best/best-epoxy-resin-for-outdoor-use
Publisher: Resin and Mold. Picks are chosen from what each Amazon listing states, not from hands-on tests. Method: https://resinandmold.com/how-we-pick

Sunlight is the problem outdoors. Every epoxy yellows and eventually chalks under direct UV; resins sold as UV resistant carry stabilizers that slow this down, they do not stop it. For a patio table, cornhole board or bar top in full sun, pick an epoxy that states UV protection, then plan a topcoat: marine builders put a UV-blocking spar varnish or two-part polyurethane over epoxy for exactly this reason. Outdoor work also brings temperature swings and moisture, so check the stated working temperature, the layer depth and whether the hardener tolerates humidity. This guide compares six epoxies by what their listings state: UV claims, mix ratio, pour depth, cure time and how much you get. Thin coating epoxies suit flat surfaces; for thick river table pours outdoors you need a deep pour resin instead. Nothing here was tested by us.

## Picks

### 1. MAS EnviroTex Lite Outdoor Epoxy 24 Oz Kit, High-Gloss

EnviroTex Lite in a version sold specifically for exterior use, 24 oz kit, 2:1 mix, up to 3/8 in per layer. The most direct answer to outdoor coating, in a small kit sized for boards and small tops.

What the listing offers:
- Listing says it is formulated for exterior use and names patio furniture, outdoor kitchens, RVs and cornhole boards.
- States resistance to rain, humidity and temperature changes, plus scratch and abrasion resistance.
- Up to 3/8 in pour depth per layer and about 45 minutes of working time are stated.

Limits to know:
- 24 oz total covers only a small surface, so a table top will need several kits.
- 2:1 ratio needs more careful measuring than a 1:1 epoxy, and the cure window is a wide 24 to 72 hours.

### 2. TotalBoat Table Top Epoxy Resin - 1 Gallon Kit for Bars and Countertops

TotalBoat Table Top epoxy, 1 gallon kit at 1:1, from a marine supplier. States UV and yellowing resistance and gives clear coverage numbers: 12.8 sq ft at 1/8 in.

What the listing offers:
- Listing states the finish resists UV, moisture, heat, scratches and yellowing, and calls it waterproof.
- Gives real coverage: 12.8 sq ft at 1/8 in thick from the gallon kit, so you can plan a top.
- Clear schedule: 40 minutes to apply, recoat after 4 to 8 hours, full cure in 16 to 20 hours.

Limits to know:
- Pour depth is limited to 1/4 in on a surface, so it is a coating, not a deep casting resin.
- Needs 70 to 80 F to apply, which rules out cold outdoor sessions.

### 3. TAKIMO 1 Gal 3X UV Resistant Crystal Clear Epoxy Resin Kit, 1:1 High Gloss

TAKIMO 1 gallon 1:1 kit sold as 3x UV resistant, with defoamers and a stated 203 F heat resistance. A lower priced gallon for covered patios and sunny indoor spots.

What the listing offers:
- Listing claims a 3x UV resistant non-yellowing formula and lists sizes from 16 oz up to 2 gallons.
- States heat resistance up to 203 F (95 C) and a 40 minute working time.
- Recommends 1/4 in layers and includes defoamers to push bubbles to the surface.

Limits to know:
- The 3x UV claim has no stated test or reference, so treat it as a marketing figure.
- The listing does not name exterior use, rain or weathering directly.

### 4. Marine Boat Epoxy Resin for Repairs, Construction, High Performance Coating, 2 Part epoxy kit, UV Stable, Non Yellowing, Chemical and Salt Resistant -1.5 Gallon Kit

Clearcast 7000, a 1.5 gallon marine epoxy sold as UV stable and non-yellowing, with chemical, salt and moisture resistance. The premium choice for boats and hard-use exterior surfaces.

What the listing offers:
- Listing calls the system UV stable and non-yellowing and names chemical, salt and moisture resistance.
- 2:1 mix by weight or volume, and it lists wood, metal, fiberglass and plastics as suitable surfaces.
- Made in the USA, and the 1.5 gallon kit is large enough for a full table or deck project.

Limits to know:
- About three times the price of the other gallon kits in this guide.
- The listing gives no working time, cure time or pour depth, so you must find the technical sheet.

### 5. Beast Bond Crystal Clear Epoxy Resin Kit 32oz, Self-Leveling, Ultra-Glossy, Bubble Free, UV & Moisture Resistant Resin Kit for Art, Jewelry, Tabletops, Wood Finishes, Marine, Easy 1:1 Mix, DIY Crafts

Beast Bond 32 oz 1:1 kit sold as UV and moisture resistant, with mixing sticks and a spatula. A low cost way to coat a sign, a small board or a test piece before a big project.

What the listing offers:
- Title names UV and moisture resistance and marine use, at the lowest price in this guide.
- 1:1 mix with 40 minutes of working time, easy for a first coating job.
- Kit includes 16 oz resin, 16 oz hardener, 5 mixing sticks and a spatula.

Limits to know:
- 32 oz total is enough for a small board, not for a table top.
- No cure time, pour depth or coverage figures are given in the listing.

### 6. Epoxy Resin Kit with Hardener - Crystal Clear, Self-Leveling, UV-Resistant, Non-Toxic Formula - High Gloss Finish for Table Tops, River Tables, Wood, Art, Crafts, Marine and DIY Projects - 2:1 Ratio

Epoxy King 2:1 epoxy sold as UV stabilized and marine grade, 100 percent solids, with stated resistance to water, oils, alcohols and cleaners. Suits outdoor wood, concrete and stone.

What the listing offers:
- Listing says it is formulated for outdoor durability, UV stabilized and marine grade.
- Names a long list of surfaces: wood, fiberglass, concrete, metal, stone and ceramics.
- States 100 percent solids with no VOCs, diluents or solvents.

Limits to know:
- The listing does not give kit volume, working time or cure time in its bullets.
- 2:1 ratio needs careful measuring; a 1:1 kit is more forgiving for beginners.

As an Amazon Associate I earn from qualifying purchases.